Electric Water Heater, Operating Voltage 480V AC, Phase Single, Three, Equivalent BtuH 40,946 BtuH, First Hour Rating Not Applicable, Maximum Recovery Flow Rate 124 gph @ 40 Degrees F, Overall Height 57.7 in, Power Consumption 12,000 W, Tank Capacity 85 gal, Tank Diameter 28.25 in, Market Commercial, Number of Elements 3, Automatic Thermostat Yes, Cold Inlet Size 1 1/2 in, Cold Inlet Type NPT, Current 25 A, Element Material Stainless Steel, Height to Cold Inlet 4.8 in
Commercial / Residential
Commercial
Water Heater Design
Whole House
Tank Capacity – Plumbing
85.0 gal
Voltage – Water Heaters
480
Phase – Water Heaters
1/3
Total Watts
12,000 W
Number of Elements
3
Recovery @ 140 F Rise
35 gph
Recovery @ 50 F Rise
99 gph
Includes
Brass Drain Valve, Factory-Installed T&P Valve
Standards
AHRI Compliant, ASME, CSA Certified, LWH, UL EPH Listed, UL Listed
Industry Type
Commercial
Recovery @ 110 F Rise
45 gph
Temp. Range
120 Degrees to 180 Degrees F
Fuel Type
Electric
Tank Capacity
85 gal
Recovery @ 120 F Rise
41 gph
Recovery @ 130 F Rise
38 gph
Item
Electric Water Heater
Phase
Single, Three
Connection Location
Cold Side/Hot Top
Water Connection
1-1/2 in NPT
Recovery @ 70 F Rise
71 gph
Features
Heavy Duty; Long Life Tank Design; Automatic Temperature Control; 98% Thermal Efficiency; Minimal Standby Heat Loss
Vent Type
Standard
Recovery @ 90 F Rise
55.0 gph
Max. Pressure
150 psi
System of Measurement
Inch
Recovery @ 100 F Rise
50 gph
Residential / Commercial
Commercial
Compliance
Exceeds Energy Effeciency Codes of all States. Design Certified by Underwriters Laboratory (UL) to Meet UL Standard 1453 and UL/NSF005., Tested According to DOE Test Procedures and Exceed the Minimum Energy Factor Requirements of Current ASHRAE Standards
Amps AC
15 for 3 Phase, 25 for 1 Phase
Application
Ferrous / Non-Ferrous Metal Over 1/8″, S/S Tube, PVC, Cast Pipe and Nail Embedded Wood
Reviews
There are no reviews yet.